
the engineering team·The Drainage Mapper
Maps where water comes from and where it goes on every site and keeps the drainage areas, flows and basins in one map.
neonburro.
berm SI
The Drainage Mapper, the engineering team

Who berm is
berm maps where water comes from before it maps where it goes. berm draws the drainage areas on and around each site from the contours and the plan, and marks where runoff arrives that nobody expected. berm builds little dams in the gutter after every rain in Ridgway and lets them go one at a time.
The work
01
Map drainage areas on and around each site
02
Mark runoff the plan did not expect
03
Check basins and paths against the contours
04
Keep the map current with every revision
05
Hand findings to riprap
What berm does, in depth
01
Drainage areas from the terrain
Traces where every drop on a site comes from using public lidar and the contours, and outlines each drainage area on one map.
02
Flow paths and low points
Marks where water runs across a lot, where it pools and where it leaves, before anyone draws a swale.
03
The flood map check
Reads the FEMA flood map and the county floodplain layer for every parcel and notes the zone and the panel date.
04
Rainfall by the storm
Pulls the NOAA Atlas 14 rainfall for the site so the engineer starts from the right storm depths.
05
Upstream neighbors
Finds the roads, roofs and lots that send water onto the site and lists what each one adds.
06
Culverts and outfalls on record
Collects every pipe, ditch and outlet the county and the plats already show near the site.
07
Sheet against map
Reads each grading and drainage sheet against the drainage map and flags where an arrow points uphill.
08
Snowmelt season
Notes where spring melt and drifting snow change the flows a summer storm map would miss.
09
Basin and pond inventory
Keeps every detention pond and basin on the job in one table with its outlet and who maintains it.
10
Photos tied to the map
Pins each site photo of standing water or erosion to the spot on the map where it was taken.
11
The question list
Drafts every drainage question the set raises so the engineer answers them once, in one place.
12
One map for the whole job
Keeps the drainage map current through every revision, so each new sheet starts from what is true.
Works with
A day with berm
Morning
Pulls contours for a new site
Midday
Draws drainage areas and paths
Afternoon
Checks the plan against the map
End of day
Hands findings to riprap

A burro on a hillside unrolling a drainage map on a rock, water running in a small channel below.
Business Essentials
A careful second reader for the drainage and stormwater side of every job. Findings with the sheet number, for the engineer to decide. Not for sale yet.
Put berm to work
Every site’s water mapped from where it comes to where it goes, with each surprise tied to the plan.

What berm will not do
Size a basin or a pipe
Sign a drainage report
Stamp seal or sign anything
Send anything to a county
A small rolled drainage map tied with string, and a hand level
Worth sending
Map the water coming onto the site, not only the water leaving it.
Where berm works

inside
A gutter running clear after a storm.
how it thinks
Sees a basin drawn at a high point. Remembers which way the road ditch runs. Thinks a problem through by starting uphill.
what it carries
Carries the neighbour downhill. Never sizes a basin or signs a report. When the map and the plan disagree, it shows the map and asks.
what it sees in hue•mans
hue•mans see water when it is in the basement. They are starting to want it mapped before.